PROTECTION AND CONTROL ENGINEER
Protection and control engineer, 400kV
Protection testing and commissioning on a 400kV substation project.
- Rate
- £500 to £600 per day
- Location
- Bramford, Suffolk
- Duration
- 12 months
- Start
- ASAP
- IR35
- Outside IR35
- Job type
- Contract
- Reference
- OZ-0129
Tickets and cards required
- Relay testing experience
- ECS card
£500 to £600 per day, outside IR35, for 12 months of protection testing and commissioning on a 400kV substation project at Bramford, Suffolk.
You will test the protection relays, prove each scheme against its drawings and take circuits through commissioning.
The work
- Secondary injection testing of protection relays against the approved settings
- Check wiring and scheme logic against the schematic and wiring diagrams
- Functional and trip testing of protection, control and interlocking circuits
- Receive permits and sanctions for test from the site SAP and work inside their limits
- Write up test results and mark up drawings as built
What you need
- Hands-on relay testing experience on transmission or distribution substations
- ECS card, in date
- The ability to read a protection schematic and find a fault in a scheme without being walked through it
On your CV, name the relay families and test sets you have used and the voltages you have commissioned at. A line that says “P&C experience” tells the client nothing.
Apply for this role
OZ-0129