11kV TO 400kV
Protection and control engineer jobs.
P&C engineers for relay testing, scheme checks and commissioning on new and refurbished substations.
Live protection and control engineer roles
Filter and searchOther high voltage disciplines
Tickets, cards and clearance
What sites ask for.
- SAP / AP
- Senior Authorised Person and Authorised Person authorisations, issued by the asset owner under its own safety rules for set voltages and equipment. They do not transfer: each new network assesses you again. Read the guide
- ECS card
- The Electrotechnical Certification Scheme card. Shows your trade and qualifications on UK sites. Read the guide
- BS 7671
- The IET Wiring Regulations. BS 7671:2018+A4:2026 is the current edition, and Amendment 2 became obsolete for new work on 15 October 2026. Read the guide
- Jointing tickets
- For the voltage and cable type the job uses, for example 33kV XLPE or PILC.
- NRSWA
- New Roads and Street Works Act card, for signing, lighting and guarding work in the highway. Read the guide
For clients
Hiring protection and control engineer contractors?
Send the role, the site, the voltage and the authorisations it needs. We call you to talk it through.
Questions contractors ask
Do I need an authorisation to test?
On a live site you work under the asset owner's safety rules. Many testing roles ask for Competent Person or AP status, and the role page states which.
Which parts of the job do roles cover?
Relay testing, scheme design checks, secondary commissioning and fault investigation. Each role says which.
Guides for this work
Tell us about your experience. We’ll tell you where it’s needed.
Upload your CV, tickets and clearance once. When a live role matches, we call you.
