SAP and AP authorisation explained
What a Senior Authorised Person and an Authorised Person do on high voltage networks, how authorisation works and why it does not move with you.
A Senior Authorised Person is the person an asset owner trusts to take charge of high voltage switching, isolation and safety documents on its system. An Authorised Person carries out switching and permit work under instruction. Both are authorisations, not qualifications. They are issued by the asset owner, under its own safety rules, for named voltages and equipment.
What does a Senior Authorised Person do?
A SAP plans and carries out switching programmes, makes equipment safe, and issues and cancels safety documents such as permits to work and sanctions for test. On a transmission or distribution network, the SAP is the last check between a live system and the people working on it.
What does an Authorised Person do?
An AP carries out switching and permit work under the instruction of a SAP or a control engineer. AP experience on live sites is usually what a SAP nomination rests on.
How do I become a Senior Authorised Person?
On National Grid’s system, a SAP candidate is nominated, mentored, trained on the safety rules and then interviewed before being authorised. Distribution network operators and private networks run their own versions of the same process. A training course on its own does not authorise you to switch anything.
Does a SAP authorisation transfer to a new network?
No. National Grid’s own appointment instruction says SAP and AP authorisations are withdrawn when someone leaves and do not transfer. Each new asset owner trains and assesses you again under its safety rules. Expect a safety rules course and an authorisation interview before you take charge of switching on a new network.
That is why every Openza HV role names the network and the voltage. A contractor should not find out at induction that the job needs a different authorisation.
Can contractors hold AP authorisation?
Yes. National Grid’s rules allow non-company staff to be authorised as APs, renewed each year. Other networks set their own rules for contractors, so check the role page.
Why does every role state a voltage?
Because authorisations are voltage-specific. A 33kV SAP is not a 132kV SAP, and an 11kV distribution authorisation says nothing about 400kV transmission equipment. Put each authorisation on your CV with its voltage, its network and its expiry date.
What else do HV sites ask for?
Most HV roles also ask for an ECS card, and roles that reach the highway ask for NRSWA. Our guide to site cards and tickets covers both. See Senior Authorised Person roles.
Register your CV and tickets and we call you when a live role matches them.
Tell us about your experience. We’ll tell you where it’s needed.
Upload your CV, tickets and clearance once. When a live role matches, we call you.